Henco Ecoline
The Henco Ecoline has been designed using the Henco Super Size system as its starting point. As a result, modularity and ease of installation go hand in hand. Either 40 or 75 mm pipes can be used for the riser system, depending on the volume required.
All assembly instructions for incorporating the Henco range apply.
Please note: The bore on the return line is controlled by a thermostatic circulation valve. A circulation pump controls the return flow to the heat source. Both are required to complete the Henco Ecoline system, but neither are supplied in the Henco range.
Advantages:
- Energy efficient due to the minimal difference in hot water temperature between supply and return.
- Cost-effective: significantly less pipework, insulation and fewer fittings required.
- Easy to install: Henco Ecoline can be installed in just a few simple steps.
- Space-saving: eliminates the need to find space for return pipework and insulation.
- Anti-legionella: standing water is prevented.
- Positive EPC impact: depending on local regulations.
- Consists of: 1 x 9HNA tee, 4 x HNA bracket, 1 x HNA-EK05 adapter and 1 x HNA-INLB base plate
Applications
Solutions
Product range
- Article number Product description LxBxH GTIN
-
HNA-ECOLINE-SET
Henco Basic set for Ecoline
05414764313040
Specifications
Specifications HNA-ECOLINE-SET
- Max. operating pressure 10 bar
- Outer pipe diameter connection 1 16 mm
- Outer pipe diameter connection 2 20 mm
- Material sealing Ethylene-propylene diene monomer rubber (EPDM)
- NetWeight 1.35
- DimensionUnitCode MMT
- MaximumOperatingPressureLiquid 10