For a 90° bend, an elbow fitting is recommended.
","sku":"BA","brand":{"@type":"Brand","name":"Henco"},"manufacturer":{"@type":"Organization","name":"Henco Industries"},"url":"https://www.henco.be/it-IT/BA"}We recommend using a bending spring to make bends in a multilayer pipe. This will prevent kinks in the pipe when bending. That is why the bending spring is placed around the pipe before bending. It is a steel spiral spring; the thin spiral forms allow you to easily make any bends.
For a 90° bend, an elbow fitting is recommended.
Soluzioni
Industria
Riscaldamento a pavimento
Costruzione impianti
Olio & Gas
Costruzione navale
Infra
Applicazioni
Gas
Acqua potabile
Riscaldamento
Aria compressa
Sanitario
Riscaldamento a pavimento
Raffreddamento
Codice articolo | Diametro | Lunghezza | Colori | ||
---|---|---|---|---|---|
BA-1288 | 12x1,88 L=50 cm | 505mm | Argento | Specifiche | |
BA-1410 | 14x2 L=50 cm | 505mm | Argento | Specifiche | |
BA-1612 | 16x2 L=50 cm | 505mm | Argento | Specifiche | |
BA-1814 | 18x2 L=50 cm | 505mm | Argento | Specifiche | |
BA-2016 | 20x2 L=50 cm | 505mm | Argento | Specifiche | |