¿En qué podemos ayudarle?
CW602N, CW617N and CW724R
The 36P press connection allows more transition types from the Henco pipe to the copper pipe.
No, this is not permitted by law.
The minimum temperature for Henco multilayer pipes and PVDF press fittings is -20°C. For solid plastic pipes, the minimum temperature is 7°C.
Henco multilayer pipes and PVDF press fittings with gas marking may be used for gas. Please note that gas application is only allowed in countries where a Henco gas inspection and certificate is available.
Yes, when Henco multilayer pipes are combined with PVDF or brass press fittings with yellow gas marking. For diesel applications, the sealing material should be HNBR (hydrogenated nitrile rubber). HNBR is a type of rubber that is resistant to high temperatures and petroleum-based oils. This is only the case with gas-marked Henco products.
This is currently being investigated, but we cannot guarantee it yet.
Only Henco standard multilayer pipes and PVDF fittings qualify for this. The Henco brass products may not come into contact with seawater.
Yes, in combination with Henco multilayer pipe and PVDF fittings. The brass threaded fittings must not come into contact with softened water.
Yes, and for fittings this applies to both PVDF and brass fittings. For that application, the correct ratio is 45% glycol and 55% water. The minimum temperature is -10°C.
Yes, however mechanical compression using an olive or threaded joints should not be embedded.